If an error message is displayed, perform the operation described in the message instructions.
If an error is detected during operation of the Printer Update Utility, an error message is displayed. To delete, highlight the printer in the list, click the minus(-) sign, then comnfirm the deletion. The one you want to delete will have a digit added after the name.
Check the Current software version again. If you are unable to click Start, the update was attempted on a printer that does not require firmware overwriting. Importantĭo not turn off the printer or disconnect the USB cable until the update is complete.
Upgrade software version: Software version to which the printer is to be updated at this time.
Printer name: Name of the printer connected to the computer.Ĭurrent software version: Software version of the connected printer.
If an error message is displayed, the possible causes are as follows:Ĭause (1): The USB cable is not connectedĬorrective action: Connect the USB cable, and start over from step 1.Ĭause (2): The downloaded update file is for a different printer.Ĭorrective action: Download the file for the printer to be updated, and start over from step 1.Ĭheck the message content of step 2, and click Start. Make sure that only one printer is connected to the computer via a USB cable.ĭouble-click (Printer Update) to start the update utility.Ĭheck the message content of step 1, turn on the printer power, and then click Next.
If a LAN cable or a USB cable for camera connection is connected, disconnect those cables.įor models with card slots, remove all the cards if they are inserted in the card slots. Update according to "Software Version Update Procedure" described below.Ĭonnect the computer and the printer by using a USB cable. X.XXX" that is printed in the print results of the nozzle check pattern. You can check the software version by printing the nozzle check pattern.Check the software version "Ver. Operating Environment for Printer Update Utility This procedure is used to update the printer's firmware to support AirPrint.